Bare Frame . . . . . . . . . . . . . . . . $2,100.00 (for dropped front axle:)
 Die stamped side rails with reveal.
Fully boxed rails, reinforced in the engine mount areas.
SAC dual plane tubular X-member.
Dropped front crossmember.
Rear spreader bar.
Rear crossmember with coil-over mounts.
Threaded body & fender mounting holes.
|
| Options for Bare Frame: ** |
 Body mount holes only (hi-boy). |
No charge |
Front narrowed and bobbed. |
add: 225.00 |
| "C" notch for front spring. |
add: 100.00 |
Pinched for '28-'29 body. |
add: 275.00 |
| "C" notch for rear axle. |
add: 100.00 |
Chrome front "V" spreader. |
add: 145.00 |
| Bobbed rear frame rails. |
add: 90.00 |
Polished s/s rear spreader. |
add: 95.00 |
| Engine mount brackets (Chevy or S.B. Ford) with drop-out trans mount. |
add: 250.00 |
| Boxed front frame horns with welded "V" spreader bar. |
add: 250.00 |
| Mild tub rear frame rails, 2" per side. |
add: 475.00 |
| Pro Street rear frame with driveshaft loop. |
add: 695.00 |
Builders Special . . . . . . . . . $ 2,795.00 (incl. Bare Frame standard features, plus: )
Brackets for: hairpin radius rods, shocks, front panhard, and rear triangulated four-bars.
Mount for Vega steering box.
Engine & trans. mounts.
Brake pedal & m/cyl. mount.
|
Options for Builders Special: **
|
| Brackets for front four-bars. |
add: 95.00 |
Power brake booster mount. |
add: 75.00 |
| Deluxe Hi-boy shock mounts. |
add: 65.00 |
Clutch pedal. |
add: 75.00 |
| Brackets for rear parallel four-bars and panhard bar. |
add: 175.00 |
| Mounts for Pro Street four-link (requires Pro Street frame). |
add: 225.00 |
Stage Two . . . . . . . . . . . . $ 5,550.00 (incl. Builders Special standard features, plus: )
SAC "California Smoothie" front spring.
SAC hairpin radius rods and batwing brackets.
I-beam axle.
Spindles with king pins and bushings.
Spring perches.
Steering arms.
Vega steering gear box with pitman arm.
Tie rod, drag link and panhard rod.
Shackles.
Shocks and mounts.
U-bolts and pad.
Rear coil-over shocks with progressive springs.
Rear triangulated four-bars.
Ford 9" rear axle housing and axles (28 spline, refurbished).
|
| Options for Stage Two: ** |
| Front parallel four-bars. |
add: 195.00 |
Smooth back axle housing. |
add: 100.00 |
| Drilled I-beam front axle. |
add: 155.00 |
31 spline H.D. axles. |
add: 195.00 |
| Tubular front axle. |
add: 35.00 |
Rear triang. 4-bars, pol s/s |
add: 210.00 |
| Rear parallel 4-bars, panhard. |
add: 225.00 |
Rear parallel 4-bars, pol. s/s |
add: 425.00 |
| Rear ladder bars, panhard. |
add: 275.00 |
Rear ladder bars, chrome |
add: 575.00 |
| Chrome/Polished Stainless pkg. A: Hairpin radius rods, batwing brackets, |
| I-beam axle, spring perches, shackles, shocks, and lower shock mounts. |
add: 650.00 |
| Chrome/Polished Stainless pkg. B: Same as A, except with four-bars. |
add: 795.00 |
| Chrome/Polished Stainless pkg. C: Front leaf spring, U-bolts and pad, |
| king pins, steering arms, tie rod, drag link, panhard bar, and pitman arm. |
add: 665.00 |
| Pro Street four-link kit with mounts & track bar (requires Pro Street frame.) |
add: 550.00 |
| Pro Street pol. s/s four-link kit (plain track bar; requires Pro Street frame). |
add: 950.00 |
| Aldan® adjustable coil-overs with black coils. |
add: 100.00 |
| Aldan® adjust. coil-overs with polished bodies, chrome coils & chrome bolt kit. |
add: 235.00 |
Stage Three . . . . . . . . . . . . $ 6,595.00 (incl. Stage Two standard features, plus: )
Front disc brakes, 11" dia. rotors with GM calipers.
Rear drum brakes, 11" dia. Ford.
Dual Corvette master cylinder.
Steel brake lines with adjustable proportioning valve.
Braided stainless flex hoses.
Hydraulic stop light switch.
Brake pedal pad.
|
| Options for Stage Three: ** |
| Power brake option. |
add: 295.00 |
Rear axle third member. |
by quote |
| Wilwood® front discs, pol. |
add: 450.00 |
Stainless brake lines |
add: 225.00 |
| Wilwood® rear discs, e-brake. |
add: 595.00 |
Cadillac rear discs, e-brake. |
add: 475.00 |
| Kugel Komponents® IFS with steel tubular A-arms, sway bar, Wilwood brakes. |
add: 1,175.00 |
| Kugel Komponents® IFS with pol. stainless tubular or cast A-arms |
add: 1,975.00 |
| ** Call for pricing on other optional features. Assembly of chassis is extra. Plus tax and shipping. 11-03 |